The next steps show you how the system should be mounted onto your kitchen front.

It is best to place the cardboard box of the kitchen front underneath the front. This prevents your kitchen door from getting damaged.

Place your kitchen front right in front of the dishwasher, with the front facing down. Place the hole pattern sheets in the left- and right-bottom corners, as seen in the picture above.

The hole pattern sheet shows the letters “A”, “B” and “C”. Use the same position as on the previous page. In our case, this is Position “C”.

The hinges must be attached using at least 2 screws. Make sure not to drill into the thin part of a kitchen front. For example, if you have a kitchen front with a decorative profile, there is a chance that you drill a screw through the thin part of the front, so check beforehand which screw holes you can use. Of course, the hinges are designed in such a way that they can be mounted onto any kitchen front.

Screw on both sides and then remove the hinges again.

The screw holes are now in place, so you can easily mount them.

…Go to the next BASIC step